* feat(auth): support multi-profile login
* fix(auth): complete multi-org profile acceptance
* feat(auth): 完成多组织 profile 验收
* docs(auth): 补充多组织 Ralph 验收材料
* feat(auth): 支持 auth switch TUI 切换 profile
* feat(auth): logout 默认清理所有组织
* feat(auth): login 默认新增组织授权
* feat(profile): 使用 profile switch 切换组织
* docs(ralph): 更新 profile switch 验收材料
* fix(profile): 展示全部可切换组织
* feat(profile): support multi-org switch tui
* chore(install): add branch source installer
* fix(profile): keep global profile out of tool params
* feat(profile): support csv multi-profile runtime
* ci: add multi-profile e2e workflow
* ci: run multi-profile e2e on all branches
* docs: document multi-profile e2e ci gate
* docs: remove multi-profile test cases from pr
* ci: harden multi-profile e2e gates
* fix(auth): serialize profiles.json RMW and harden multi-profile persistence
Wrap all profiles.json read-modify-write paths (profile switch/use/remove,
status marking, token save, logout) in the existing dual-layer lock via a new
withProfilesLock helper. Split each writer into a public (locking) entry point
plus a lock-free *Locked variant so the non-reentrant lock is never re-acquired;
the refresh path (oauth_helpers) and the load-path legacy migration now call the
lock-free saver to avoid self-deadlock.
Also: write profiles.json and the token marker via per-write random temp names
(uuid) to stop concurrent writers from corrupting a fixed .tmp file; quarantine
an unparseable profiles.json and rebuild an empty config so the CLI can
self-heal instead of locking out auth reset/logout; make DeleteAllTokenData
proceed even if profiles.json cannot be read; and stop SyncLegacyTokenMirror
from deleting the legacy mirror on a transient keychain read error.
* fix(auth): do not fall back to a different org's legacy token slot
When no explicit --profile is given, LoadTokenDataForProfile resolves the
current/primary profile and reads its per-corp keychain slot. If that slot
read failed, the code silently fell through to the legacy single token slot,
which after any drift between the legacy mirror and the current profile could
belong to a different organization. The command would then run as the wrong
org with no indication to the user.
Reproduction (conceptual):
- profiles.json currentProfile = corpA
- corpA's keychain slot is unreadable, legacy single slot still holds corpB
- any read command (no --profile) silently used corpB's token
Fix: when a profile is resolved but its slot read fails and no --profile was
given, only fall back to the legacy single slot when its CorpID matches the
resolved profile (same org); otherwise return the original error instead of
acting as a different organization. The no-profile legacy path (pre-migration
installs with no resolved profile) is unchanged.
Tests:
- Covered by the existing internal/auth suite under go test -race; the
same-org fallback preserves the legacy-mirror case while the cross-org
case now surfaces the read error.
* feat(skill): document multi-org profile usage and always ship dws-shared
The skills had no guidance on the multi-profile capability, so an agent would
treat the CLI as single-org: when a lookup missed in the current org it would
give up or ask the user instead of searching other logged-in orgs. The multi
skill set also referenced a `dws-shared` prerequisite that was never actually
installed, and the only multi-org hints lived inline in three product skills.
This adds, in source only:
- A "multi-org / profile" section in the mono SKILL.md (concept, commands,
cross-org rule, aggregation, safety guardrails) plus a decision-tree entry,
trigger conditions, and a corrected logout danger-table row (logout removes
all orgs by default; removing the primary silently re-elects a new primary,
confirm before removing the primary).
- A standalone skills/multi/dingtalk-profile skill mirroring the same content.
- A new skills/multi/dws-shared skill that carries auth, global flags and the
multi-org rule, so every product skill's PREREQUISITE resolves and all
read/search skills inherit the cross-org behavior without per-skill edits.
- Cross-org fallback notes on dingtalk-aisearch / chat / contact.
To guarantee the prerequisite actually ships, multi-mode install now force-
includes dws-shared even when --skill / --exclude narrows the set (no-op when
the source has no dws-shared, preserving older layouts).
Tests:
- internal/app: TestP1SharedAlwaysIncludedWithSkillFilter installs with
`-s aitable` and asserts dws-shared still lands in the destination;
TestP1SharedNoopWhenAbsent guards the older-layout no-op.
- go test -race ./internal/auth/... ./internal/app/... passes.
---------
Co-authored-by: shangguanxuan.sgx <shangguanxuan.sgx@alibaba-inc.com>
Co-authored-by: qinze <audanye@gmail.com>
PR #184 merge conflict resolution inadvertently introduced a conditional
branch that preserved stale clientID from previous login sessions instead
of always re-fetching from MCP server. This caused exchangeCode() to use
direct DingTalk API mode (which requires clientSecret) instead of MCP
proxy mode, resulting in 'clientId或者clientSecret错误' errors.
This commit restores the original PR #157 logic: both DeviceFlowProvider
and OAuthProvider unconditionally call resetCredentialState() followed by
FetchClientIDFromMCP() + SetClientIDFromMCP(), ensuring exchangeCode()
always uses the MCP proxy path regardless of prior login state.
Root cause: the conditional branch treated any non-empty clientID (from
runtimeClientID or app.json) as a user-provided --client-id flag value,
skipping MCP re-fetch and leaving clientIDFromMCP=false after reset.
Affected scenarios:
- OAuth login → device flow login
- Any login → --force login
- New terminal with existing app.json → device flow login
Fixes regression introduced in PR #184 (commit 46192d6).
Restores fix from PR #157 (commit ad33a46).
Co-authored-by: 猷诺 <bicheng.ybc@alibaba-inc.com>
Device flow now always clears stale credential state and re-fetches
clientID from MCP server, regardless of what previous login methods
(OAuth scan, PAT, etc.) left in app.json or runtime globals.
This replaces the previous Source-field approach with a simpler
defensive reset that is future-proof against new login methods.
Root cause: after OAuth login saved app.json without MCP source marker,
subsequent --device login reused the stale clientID without setting
clientIDFromMCP flag, causing exchangeCode() to use direct mode which
requires clientSecret.
Changes:
- Add resetCredentialState() to DeviceFlowProvider
- Login() always calls resetCredentialState() + FetchClientIDFromMCP()
- Remove AppConfig.Source field (no longer needed)
- Remove app_config_source_test.go (replaced by device_flow_reset_test.go)
- Add 5 tests covering OAuth→device, legacy→device, direct→device scenarios
Co-authored-by: 猷诺 <bicheng.ybc@alibaba-inc.com>
* feat: PAT scope error visualization and auto-retry with authorization polling
1. PAT error result visualization (non-JSON)
- Human-readable error output matching lark-cli style
- Shows error type, message, hint, and authorization command
- JSON output also available via --format json
2. Auto-retry with polling after authorization wall
- Detects missing_scope / insufficient_scope / permission errors
- Polls every 5s for token update after user completes auth
- 10 minute timeout before giving up
- Automatically retries the original command after successful auth
Changes:
- internal/app/pat_auth_retry.go: Core PAT error handling and retry logic
- internal/app/pat_auth_retry_test.go: 11 unit tests
- internal/app/runner.go: Integration with executeInvocation error path
- internal/auth/device_flow.go: Add SetScope() method
* feat: migrate PAT (Permission Authorization) infrastructure to open-source core
Move PAT permission management code from dws-wukong overlay to the
open-source dingtalk-workspace-cli core. This enables PAT handling
in the public distribution while keeping dws-wukong fully compatible
through the edition.Hooks mechanism.
Changes:
- pkg/edition: add 6 new Hooks fields (AuthClientID, AuthClientFromMCP,
SaveToken, LoadToken, DeleteToken, ClassifyToolResult) for overlay
extensions to inject custom auth/token/error behaviour
- internal/errors/pat: new PATError type with ExitCode()=4 and
RawStderr() for embedded-mode passthrough, plus ClassifyToolResultContent
and ClassifyMCPResponseText classification functions
- internal/pat: new command group (pat chmod) with tool result handling
- internal/app/root: register PAT commands before RegisterExtraCommands hook
- internal/app/runner: integrate ClassifyToolResult hook in the
callResult.IsError branch so overlays can intercept PAT/gateway errors
before generic handling
The dws-wukong overlay remains unchanged — its existing pat/ package and
RegisterExtraCommands hook continue to work. Through the go.mod replace
directive and deduplicateCommands mechanism, both codebases coexist
without conflict.
* feat(pat): add PAT auth check with device flow polling and auto-retry
- Add ClassifyPatAuthCheck / AsPatAuthCheckError in pat.go for
AGENT_CODE_NOT_EXISTS error detection
- Add handlePatAuthCheck in pat_auth_retry.go: inject clientId as
x-robot-uid header, poll device flow endpoint, auto-retry on APPROVED
- Integrate PAT check into runner.go executeInvocation pipeline
(edition hook + open-source fallback)
- Add patAuthRequiredCodes map for extensible auth-required code matching
- Remove test_parse.go (temporary test script)
* fix(pat): update poll path to /cli/oauth/device/poll and add x-user-access-token header
- Change DevicePollPath from /api/dingtalk-workspace-cli/oauth/device/poll
to /cli/oauth/device/poll (aligning with backend endpoint convention)
- Add x-user-access-token header to poll requests (loaded from stored token)
* feat(auth): PAT device flow improvements and flowId empty guard
- pat_auth_retry: fix JSON field parsing (result -> data) using DevicePollResponse
- pat_auth_retry: fix elapsed time calculation based on start timestamp
- device_flow: add flowId empty guard - skip polling and show auth URL for manual handling
- device_flow: unify terminalBaseURL to GetMCPBaseURL for polling endpoint
- device_flow: remove unused PollFlowApproval dead code
- runner: integrate DWS_CLIENT_ID env and app.json persistence
- oauth_provider: add x-robot-uid header removal on logout
- client: add request/response logging for transport debugging
* feat(env): switch all service discovery URLs from pre-release to production
- endpoints: pre-login/pre-api/pre-mcp/pre-open-dev -> login/api/mcp/open-dev
- loader: DefaultMarketBaseURL -> mcp.dingtalk.com
- registry: defaultBaseURL -> mcp.dingtalk.com
- constants: DefaultTerminalBaseURL -> open-dev.dingtalk.com
* fix: remove residual merge conflict markers and duplicate Hooks fields in edition.go; unify developer-settings URL via config helper in device_flow.go
* chore: remove lark-cli reference from PrintPatAuthError comment
* test: add comprehensive unit tests for PAT auth modules
- Create internal/errors/pat_test.go (38 tests): covers ClassifyToolResultContent,
ClassifyMCPResponseText, ClassifyPatAuthCheck, AsPatAuthCheckError, cleanPATJSON,
stripClassFields, getDWSGatewayErrorCode, isNotLoggedInError, isBusinessError,
IsPATError, IsPATNoPermissionCode, suggestForBusinessErrorText
- Supplement pat_auth_retry_test.go (+7 tests): IsPatRetrying context checks,
pollPatDeviceFlow edge cases (server error fallback, SSO redirect skip),
extractPatScopeError nil/identity extraction
* feat(pat): exchange authCode for fresh token after PAT APPROVED
Previously pollPatDeviceFlow discarded the authCode from the poll
response, so handlePatAuthCheck retried with the stale token after
APPROVED. This mirrors device_flow.go loginOnce which calls
exchangeCode → SaveTokenData.
Changes:
- pollPatDeviceFlow: return (status, authCode, error) instead of
(status, error); extract Data.AuthCode on APPROVED
- handlePatAuthCheck APPROVED path: call ExchangeCodeForToken +
SaveTokenData before ResetRuntimeTokenCache, with graceful
fallback on exchange failure
- Update all 6 poll test cases for new 3-return signature; add
authCode assertions for APPROVED/REJECTED/EXPIRED/CANCELLED/
ServerError scenarios
* fix(pat): CR round-2 must-fix items
- scopeValueRegex: support multi-segment scopes (mail:a.b:send)
Updated regex to ([a-zA-Z][a-zA-Z0-9_.]*(?::[a-zA-Z][a-zA-Z0-9_.]*)+)
- handlePatAuthCheck: add 3 integration tests (APPROVED/REJECTED/EmptyFlowID)
Covers the 132-line main orchestrator with mock runner + httptest server
- Extract ParseDeviceFlowStatus + status constants to auth package
Eliminates string literal duplication across device_flow.go and pat_auth_retry.go
* fix(pat): use direct OAuth path when clientSecret is provided
When PAT error response includes both clientId and clientSecret,
use SetClientID() (direct DingTalk API mode) instead of
SetClientIDFromMCP() (MCP proxy mode). The MCP proxy does not
hold the secret for the PAT-assigned app, causing HTTP 400
'invalidParameter.idOrSecret.notFound' on token exchange.
Now: clientSecret present → direct mode; absent → MCP proxy mode.
---------
Co-authored-by: shangguanxuan.sgx <shangguanxuan.sgx@alibaba-inc.com>
Previously, when the /cli/cliAuthEnabled API was unreachable (network
error, timeout, 5xx, etc.), both OAuth and Device Flow login modes
silently assumed CLI access was enabled (fail-open). This allowed users
to "successfully" log in even when their organization had not granted
CLI data access, leading to confusing failures on subsequent API calls.
Changes:
- Reverse the check logic in OAuth callback: treat any error as
"not enabled" instead of "enabled", showing the permission request
page so users can take action.
- Block login in Device Flow when the check fails, with a clear
error message asking users to verify network connectivity.
- Add retry with backoff (3 attempts, 0s/1s/2s) to
CheckCLIAuthEnabled to tolerate transient network issues.
- Add retry with backoff (3 attempts) to FetchClientIDFromMCP
(/cli/clientId) for the same transient-error resilience.
- Add i18n entries (en/zh) for new error messages.
- Add 19 tests covering server error, connection refused, malformed
JSON, timeout, transient-then-recovery, business error, and full
Device Flow loginOnce integration scenarios for both endpoints.
Made-with: Cursor
When logging in with --client-id and --client-secret, credentials are now
automatically persisted to enable automatic token refresh after expiration.
Client secret is securely stored in system Keychain, config file only
contains a reference.
